Source:-LRDE Pushing for Uttam AESA for Last Batch of Tejas Mk-1A
The home-grown Uttam Active Electronically Scanned Array (AESA) radar developed by Electronics & Radar Development Establishment (LRDE) seems to be making the right moves to get the attention of the Indian Air Force (IAF).
With the addition of AESA radar being one of the key features of Tejas MK1A, LRDE hopes that Uttam can even meet the schedules of the upgraded programme.
It has already completed more than 100 hours of flying on a hired aircraft and nearly 25 hours on Tejas test platforms. It is now confirmed that Uttam’s air-to-air mode and its sub-mode functionalities have been already tested.
Uttam is in competition with the Israeli Elta radar and the official word is not yet out on the question of how many Tejas MK1As (total 83) will be fitted with the desi technology.
LRDE scientists are pinning their hopes on the Aatmanirbhar Bharat mandate.
Uttam Radar
The Uttam is an advanced active phased array radar (APAR) system being developed by Electronics and Radar Development Establishment (LRDE) for the HAL Tejas and other combat aircraft of Indian Air Force. Development of Uttam started in 2008 and it was first unveiled at Aero India 2009. Uttam is slated to be a successor to hybrid passive electronically scanned array radar EL/M-2032 currently equipping LCA Tejas. Radar is currently being integrated with an LCA.
UTTAM has capabilities like, Identification friend or foe (IFF), electronic and communication support measures, C-band line-of-sight and Ku-band SATCOM datalinks, etc., similar to those on the AWACS and Conformal Airborne Early Warning & Control Systems (CAEW) systems.
The important modes of operation of the UTTAM radar system are the surface surveillance and the air surveillance. The sensor has the abilities to search, track-while-scan, priority tracking, high performance tracking, etc. In priority tracking, the targets will be placed in full track mode even if these cross the primary surveillance area. In high performance tracking, additional measurements are made to improve the tracking accuracy. Utilizing active aperture technology, the radar provides a fast-beam agile system that can operate in several modes concurrently.
Uttam features an active phased array (APAR) which gives it superior scanning performance over legacy passive phased array radar. Unlike most contemporary radars, Uttam features Quad TRM i.e. a single plank consists of 4 TRMs. It allows the array to be more densely packed. Each TRM is equipped with low noise power amplifier, built-in test facility, digital phase-gain, and side lobe control elements. The inert model displayed at Aero India 2015 had ~184 QTRMs i.e. 736 TRMs. The array temperature is controlled by a liquid coolant circulation system. The QTRM configuration makes Uttam maintenance friendly. The radar can be scaled up or down depending on antenna size requirement.
Source: Anantha Krishnan M / MANORAMA ONLINE
The post LRDE Pushing for Uttam AESA for Last Batch of Tejas Mk-1A appeared first on Indian Defence News.Indian Defence News - Defence Update
Please Visit Our Site For Latest News On Indian Army, Navy and Airforce Indian Defence News.
from Indian Defence News https://ift.tt/3h6Sn7i
via IFTTT
No comments: